Skip to main content

Auto Shutdown Pc without using any external program

Auto Shutdown Pc without using any external program

--------------------------------------------------------------------------------

Auto Shutdown Pc without using any external program :::::::::::::::::::

********** METHOD # 1 ***************
Do you know that you can make your PC shutdown at a time u wish to?
Here is the trick!!
How To Make A Shutdown Timer!

Step 1:

Right click on your desktop and choose "New=>shortcuts".

Step 2:

In the box that says "Type the location of the shortcut",
type in "shutdown -s -t 3600" without the quotation marks and click next.

Note: 3600 are the amount of seconds before your computer shuts down. So , 60secs*60mins=3600secs.

Step 3:

Make up a name for the shortcut and you're done.
You can change the icon by right clicking=>properities=>change icon=>browse.

To abort

To make an abort key to stop the shutdown timer just create another shortcut and make
the "location of the shortcut" to " shutdown -a" without the quotes.

********* METHOD # 2 **************
Here is another trick to shutdown at a specific time, for example you wish to shutdown at 11:35am. Type this in

start=>Run

Type Code: at 11:35 shutdown -s


to abort

Code:

shutdown -a


take note: all time are in 24hr, example u would like to shutdown at 8:30pm, you should type

"at 20:30 shutdown -s" without quote

******** METHOD # 3 ***************

You can use a batch for that as well it makes it easier to use
just run the batch and enter the time you want it to shutdown

shutdown.bat
Type Code:
@echo off
title Scheduled Shutdown Batch Example by chacha1234
color A
echo Enter Time To Shutdown (example 19:30)
set /p stime=
cls
at %stime% ""shutdown -s -t 00"" >nul
echo Your PC Will Auto Shutdown At %stime%
echo Press Any Key To Exit
pause >nul
exit

Comments

Popular posts from this blog

Duplicate IP Address has been Detected Rule

A duplicate IP address has been detected on the network Rule Knowledgebase Summary This rule generates an alert when Windows® detects that he local machine’s IP address is in conflict with one or more identical IP addresses on the network. Until the IP address conflict is resolved, remote clients and applications may have difficulty accessing resources on any of the effected computers. Additionally, the local computer may not be able to access network resources. Related Events This rule generates an alert whenever the following events occur and are recorded in the System Event Log: The system detected an address conflict for IP address %2 with the system having network hardware address %3. The local interface has been disabled. Source: TCPIP; Event ID: 4198; The system detected an address conflict for IP address %2 with the system having network hardware address %3. The local interface has been disabled. Source: TCP...

Schedule Automatic backup config in Cisco Nexus

Schedule Automatic backup config in Cisco Nexus Nexus-Sw1(config)#feature scheduler   //Enable scheduler service in Nexus Nexus-Sw1(config)#scheduler job name backup-daily      // Job Name Nexus-Sw1(config)#scheduler aaa-authentication username abcd password abcd@123     // AAA - Authentication for Job created above (If AAA configured) Nexus-Sw1(config)#scheduler job name backup-daily copy running-config tftp://192.168.1.23/$(SWITCHNAME)-cfg.$(TIMESTAMP)         //IP of TFTP SERVER , file will saved with switch name and timestamp exit Nexus-Sw1(config)#scheduler schedule name backup-daily   // Setup Schedule to run for the JOB Nexus-Sw1(config-schedule)# time ?   daily    Specify a daily schedule   monthly  Specify a monthly schedule   start    Specify a future time schedule   weekly   Specify a weekly schedule...

VMware CPU and Memory Reservations: Fixing Insufficient resources to satisfy configured failover level for HA

Source Knowledge From :-  http://geekswing.com/geek/vmware-cpu-and-ram-reservations-fixing-insufficient-resources-to-satisfy-configured-failover-level-for-ha/ VMware CPU and Memory Reservations: Fixing Insufficient resources to satisfy configured failover level for HA This post comes from a few days of poring over manuals as well as some technical support. This is a good one. The error came from trying to power on a VM in our VMware cluster and we would get these errors: “Insufficient resources to satisfy configured failover level for HA” And this alert on our cluster “Insufficient resources to satisfy HA failover level on cluster vmCluster in vmTST” Our way of thinking was we had to power one off to power another one on. But that didn’t work. Here we is the actual solution. (p.s. Great VMware HA education for me on this one!) PROBLEM SOURCE: VMware HA is turned on and you are violating constraints VMware HA is turned on, and you have i...