Creating a VLAN for Cisco Networking

When working with your Cisco network, you may want to separate users into different broadcast domains for security or traffic reduction. You can do this by implementing VLANs. The following example will create VLAN (VLAN2) and place the ports on a switch (from 1-12) into VLAN2.

Switch1>enable
Switch1#configure terminal
Switch1(config)#interface vlan 2
Switch1(config-if)#description Finance VLAN
Switch1(config-if)#exit
Switch1(config)#interface range FastEthernet 0/1 , FastEthernet 0/12
Switch1(config-if-range)#switchport mode access
Switch1(config-if-range)#switchport access vlan 2

If you are connecting two switches together, then you will want to allow all configured VLANs to pass between the two switches. This is accomplished by implementing a trunk port. To configure port 24 on your switch to be a trunk port, you will use the following code:

Switch1>enable
Switch1#configure terminal
Switch1(config)#interface FastEthernet 0/24
Switch1(config-if-range)#switchport mode trunk

Comments

How to enable SSH login access to a Cisco router

This guide walks you through how to setup SSH on a Cisco Router. SSH is by far more secure then telnet. Telnet allows your passwords to be sent in plain text that anyone can see and gain access to your network. SSH is all encrypted traffic. NOTE: This should work with any Cisco router provided the Cisco IOS on the router supports ssh. Firstly is ssh enabled? router#sh ip ssh SSH Disabled - version 2.0 %Please create RSA keys to enable SSH. Authentication timeout: 60 secs; Authentication retries: 5 In this case its not, if you got a error saying that sh ip ssh is not recognized then you would know that ssh is not supported or possibly that the command is different for your platform. How to enable SSH on a Cisco 800 series router# config term router(config)#crypto key generate rsa usage-keys label router-key The name for the keys will be: router-key Choose the size of the key modulus in the range of 360 to 2048 for your

INSTALL DOT NET FRAMEWORK ON MULTIPLE SERVERS USING POWERSHELL SCRIPT

Installing .Net 4.5.2 $servers = Array of Servers foreach($server in $servers) { Write-Host “Copying the installation file” copy-item –path “-SOURCE” –destination “ destination ” Write-Host “Installing .NET 4.5.2” Invoke-Command –Computername $server –Credentials xxxx { C:\Temp\ NET 4.5.2 /passive /norestart }

Connection failed: enforce firewall policy failed (on win 7 / 64bit)

Connection failed: enforce firewall policy failed (on win 7 / 64bit) error: connection failed: enforce firewall policy failed client: Check point endpoint security r75 build 835002205 on win 7 / 64 bit The solution is to find driver file vsdatant.sys and copy it to system32/drivers Ref :- https://forums.checkpoint.com/forums/thread.jspa?messageID=46927

Crazy IT Professionals

Search This Blog